October, 16th -17th, 2019 Thank you very much for your active participation! It is time to share all the materials workshop. We hope you were able to get new insights and interesting discussions during the presentations and demonstrations. All the materials...
Identification: Work Package 3 – “Massive Integration Of Power Electronic Devices”
To propose and develop novel control and management rules for a transmission grid to which 100 % converter-based devices are connected while keeping the costs under control;
To check the viability of such new control and management rules within transmission grids to which some synchronous machines are connected;
To infer a set of requirement guidelines for converter-based generating units (grid codes), as far as possible set at the connection point and technology-agnostic, which ease the implementation of the above control and management rules.
Build a laboratory test bench to test the proposed control
Period: from 01/01/2016 to 12/31/2019
Sponsors: European Union
Context: Smart Transmission System, Power electronic converters
Development and verification of an innovative control strategy
Stability analysis tools development
Test control with a real time simulated power system using PHIL simulation
Identification: “Operation modes and Power Quality assessment of photovoltaic micro-inverters”
Study the behavior of photovoltaic micro-inverters (power rating from 250W to 500W)
These kind of inverter is used to interconnect one or two photovoltaic panels.
The objectives of this study is to test micro-inverters from different manufacturers in both the normal and degraded modes of operation.
This work has been focused on the limits of normal operation and Power Quality studies.
Period: from 2016 to 2017
Context: Micro-inverter is the youngest solar inverter technology. The main argument in favor of the use of micro-inverters is that their connection is easy and allows to have “plug & play” PV modules. Also, the growth of this market is based on the capacity of low skilled workers to realize PV installations. Moreover, the number of micro-inverter manufacturers is rising since the last three years. Thus, it is difficult to compare the product among themselves.
Develop a PV micro-inverter test bench
Results comparison to manufacturer data
power measurements at 10%,20%,30%,50% and 100% of the rated Power
Efficiency and EU efficiency computations
Minimum and maximum AC voltage protection testing
Minimum and maximum frequency protection testing
Islanded mode operation on a RLC load
To check the micro-inverter behavior during power quality studies in the case of harmonic voltages in the AC grid. Power quality measurements like:
Partner n ° 1 (Pilot): Laboratoire L2EP in Lille / Arts et Métiers ParisTech – Lille, 8 Boulevard Louis XIV – 59000 LILLE (France)
Partner n ° 2: Laboratoire L2EP in Lille / Ecole centrale de Lille, Cité Scientifique, 59651 Villeneuve-d’Ascq
Identification: “Power amplifier for ultra-fastAC/AC conversion”
To insure the security and reliability a complex and wide coverage tests must be carried out during the whole life-cycle of the products in such industries as power production, aviation, electrical vehicles and railways. The power hardware in the loop or HIL simulation is more and more used to reduce testing costs and protect the real hardware from faulty controllers and in faulty condition tests. The electrical power systems such as drives and converters have a very fast dynamic and cannot be emulated using classical HIL equipment. The IRIS and PLUTON projects aims to develop new power hardware in the loop by exploiting new power converter topologies coupled with the Field Programmable Gate Arrays (FPGA) computing capability for drastically decreasing the simulation time steps allowing the real time simulation of the electrical power systems.
Development of ultra-fast AC/AC conversion power amplifier for Powerhardware in the loop applications.
Coupling this power amplifier and the IRIS solver.
Lasting: since February 2017
Partner n ° 1: L2EP, EPMLab
Address: 8, Boulevard Louis XIV – 59000 LILLE (France)
The Integration of Real time simulation on FPGA components or IRIS project is the joint effort of EPM laboratory and SPHEREA Test and Service company aimed to develop a new real time simulation system for power electronics and electrical machines based on a custom fast computational hardware implemented in Field Programmable Gate Arrays.
The product testing and maintenance is an important part of its life cycle in the industries with high security and quality demands such as aerospace, transportation or energy production. It allows reducing the risks of accidents, prevents financial losses due to systems failures in energy production and to increase safety. The testing can be very costly for big and complex systems such as an airplane or an electrical station but, although necessary, it can be replaced by a real time simulation at the first stage of the controllers and subsystems verification. In some cases, the testing on the real hardware can be even impossible if a response to faulty conditions is to be checked. The hardware in the loop simulation allows carrying out integral tests of the control systems and independent subsystems without connecting to the actual real-world equipment to greatly reduce the costs and damage risks.
The conventional HIL simulation systems doesn’t allow real time simulation of systems with very fats dynamics such as electrical power systems and machines. The IRIS project is centered around solving the dynamics equation of electrical systems and its acceleration with FPGA/System on Chip. Currently it includes the solvers for generic linear electrical systems based and power electronics the augmented nodal method, and synchronous electrical machines based on state space modeling, but additional type of solvers are planned to be developed. For both these methods a lot of computational power is required if fast real time dynamics simulation is to be achieved. Form the other point of view, the real-time simulation requirements impose the constraints on the loopback response latency.
To respect these constraints the IRIS project uses hardware computation acceleration and input outputs control base on FPGAs – electronic components allowing to build reconfigurable digital logic circuits. Compared to conventional microprocessors they provide much larger flexibility and optimization of computation pipelines and compared to such devices as GPU they allow hard real time determinism insuring that a proper signal will be sent in the proper place and at the correct time which is very important for the communication with tested equipment and controllers.
The IRIS simulation system has a modular architecture with asynchronous simulation modules designed for the specific electrical system simulation. The simulation modules are controlled and configured from the system on chip with an ARM core which is also used for host PC communication. This allows online configuration and reconfiguration on the fly to treat non-linearities and slow dynamics that can also be simulated on software part.
The solvers developed in the IRIS project can be used for simulation of electrical power systems for the first stage testing and verification. It can be applied for testing and verification of power production, onboard power grids, electric propulsion and mechatronics in aerospace, automotive, railroad and power production industries. If you are interested in getting more information about the IRIS project or how you can apply it to solve your tasks, feel free to contact us at the contact information given below.
SPHEREA Test and Service
5 Avenue Georges Guynemer CS70086 31772 Colomiers Cedex, France
Privacy & Cookies Policy
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.